General Finishes Enduro Pro Series White Polyurethane White is a single-component self-cross linking polyurethane/acrylic pigmented topcoat designed for fast build with 2-coat hide capability. Priced competitively for the professional and industrial markets, Pro Series White is tintable and fast dry with excellent flow and leveling.
Specifications
| Type | Urethane/Acrylic Blend |
|---|---|
| Base | Water |
| Interior / exterior | Interior only |
| Sheens | Flat (10), Satin (30), Semi-Gloss (55) |
| Apply with | Brush, Roll, Spray |
| Spray tip | HVLP 1.3mm-1.5mm |
| Dry to touch | 30+ minutes |
| Recoat after | 1+ hours |
| Full cure | 21 days |
| Coverage | 450 sq ft (41.81 m²) per Gallon |
| Durability | Medium |
| Over an existing finish | Yes - see product page application instructions. |
| Tintable | Yes |
| VOC | All sheens under 150 g/L. |
Questions & answers
Can I brush or roll Pro Series White?
Yes. It can be brushed, rolled or sprayed. For HVLP, a 1.3 mm to 1.5 mm tip is recommended.
What is it made for?
Interior cabinets, trim, doors and furniture, over raw or primed wood.
Which sheens are there?
Flat, Satin and Semi-Gloss.
Can I speed up drying?
Yes. Let each coat flash off for 10 minutes at room temperature, then warm the surface to 105°F with an infrared lamp or oven. Let it cool before sanding, and allow at least 30 minutes between coats.
How long between coats, and when is it cured?
Dry to the touch in 30+ minutes, ready to recoat after 1+ hour, and fully cured at 21 days. It can be tinted, and every sheen is under 150 g/L VOC.
Specifications from General Finishes.