General Finishes Enduro Pro Series Clear Polyurethane is a single-component, self-cross linking polyurethane/acrylic topcoat designed for fast build with excellent flow and leveling. Priced competitively for the professional and industrial markets
Specifications
| Type | Urethane/Acrylic Blend |
|---|---|
| Base | Water |
| Interior / exterior | Interior only |
| Sheens | Flat (10), Satin (30), Semi-Gloss (55) |
| Ambers (yellows) | No |
| Apply with | Brush, Roll, Spray |
| Spray tip | HVLP 1.1mm-1.5mm |
| Dry to touch | 30+ minutes |
| Recoat after | 1+ hours |
| Light use after | 7-10 days |
| Full cure | 21 days |
| Coverage | 450 sq ft (41.81 m²) per Gallon |
| Durability | Medium |
| Over an existing finish | Yes - see product page application instructions. |
| Tintable | Yes |
| VOC | All sheens under 200 g/L. |
Questions & answers
Can I brush or roll Pro Series Clear?
Yes. It can be brushed, rolled or sprayed. For HVLP, a 1.1 mm to 1.5 mm tip is recommended.
What is it made for?
Interior cabinets, trim, doors and furniture, over raw, stained or primed wood.
Will it yellow?
No. It does not amber.
Can I speed up curing?
Yes. Let each coat flash off for 10 minutes at room temperature, then warm the surface to 105°F with an infrared lamp or oven. Let it cool before sanding, and allow at least 30 minutes between coats.
How long between coats, and when can I use it?
Dry to the touch in 30+ minutes, ready to recoat after 1+ hour, light use after 7-10 days, and fully cured at 21 days. Sheens are Flat, Satin and Semi-Gloss, and it can be tinted.
Specifications from General Finishes.